Before installing the automatic edge banding machine, check whether the ground is firm and flat. Install the machine on the concrete floor to ensure the stability of the machine after setting. At the same time, the installation location should be at least 500㎡ and ensure sufficient space. For installation, operation, access, repair and maintenance.

The machine installation steps are as follows:

1. Remove the packaging of the fixed mechanical parts.

2. Place the machine on the ground and adjust the level.

3. The roll-type sealing material is fixedly mounted on the machine by the storage turntable.

4, connect the external power cord, the total power cord diameter should be more than 4 square centimeters.

5. Connect the air source.

6. Connect the suction pipe to the dust removal device.

7. Check if the voltage is normal, and ensure that the compressed air is sufficient and dry.